1966 - 1977 Ford Bronco Stainless Air Dam with Built-in Tool Tray

Description

Here's our new air dam tool tray. Not only does it look great but it's functional as well. The brushed stainless will fit right in at any car show and should you need a spot to hold some tools while you're working under the hood it will serve that purpose also. The air dam channels more air through the radiator by not allowing the air out of the top of the core support. The air dam comes as a three piece kit you can choose to use just the right and left tray if you want to retain the stock latch. If you are running hood pins the center section can be installed for a nice finished look.
* It is possible to use the stock hood hold up rod by installing it from the engine side of the core support. You will need to twist the rod 180 degrees in order to utilize the end that goes to the hood. We recommend just going to our Shox In The Hood kit if you have not done so already.
* Slight modification (grinding small amount of metal for clearance) of the grill to core support sheet metal may be necessary for proper installation of the center piece.
* If your Bronco has grill trim molding you will need to make clearance around the grill trim molding retainers.
For discount on this item please contact Brian at Wildhorses4x4
209   400    7200
Thank you for allowing us the chance to enhance your 4x4 experience.
-Wild Horses 4x4 Team